Canon Powershot A720 IS Shutter Button Replacement

Última actualización: May 7, 2024

40 minuto - 1 hora

Difícil

Rebanar y Trocear

Bordeador de Pasos

Mejor introducción

Introducción

Have you ever had your shutter button get stuck in the middle of taking pictures? Use this guide to get it back in place.

Herramientas

Herramienta utilizada en este paso:

Tweezers

$4.99

Carefully insert the tip of the tweezers in the space between the shutter button and the zoom dial. Gently insert the tip under the button and slowly lift.
If this step does not dislodge the shutter button, move on to step 2.
Do not force the tip of the tweezer or insert the tweezer too deep in between the shutter button and zoom dial. It will cause permanent cosmetic and button damage to the camera.

On the bottom of the camera, open the battery compartment by pushing the lock up. The door will then spring open allowing you to slide the batteries out.
If an SD card is also inserted, push on it to easily remove it from the camera.

On the left side of the camera remove the two visible 4mm Phillips head screws.
On the right side of the camera remove the two visible 4mm Phillips head screws.
On the bottom of the camera remove the two visible 4mm Phillips head screws.

Remove the two 3 mm screws below the LCD screen using a Phillips #00 screwdriver.
Unscrew the top 4 mm Phillips head screw.

Remove the gray rubber cover labeled DC IN DIGITAL A/V OUT if it hasn't fallen out yet on its own.
Carefully pull the front panel away from the rest of the camera.