Canon PowerShot SD30 Back Cover Replacement
Introducción
Ir al paso 1This guide is required in order to replace any of the deeper components in the camera. Any component of the camera cannot be reached unless the back cover is removed.
Qué necesitas
Herramientas
-
-
Remove the 2mm screw from the back of the camera.
-
Remove two 2mm screws from the bottom of the camera.
-
Remove two 2mm screws the left side of camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
University of North Texas, Team S5-G3, Thompson Fall 2018 Miembro de University of North Texas, Team S5-G3, Thompson Fall 2018
UNT-THOMPSON-F18S5G3
4 Miembros
5 Guías creadas
