One major reason as to why users’ phone turns on by itself might be the Ambient Display feature. The main aim of this feature is to display notification data on device when users pick it up or get a notification, without users having to manually turn on the display. If so is the case, users need to turn off that feature. Follow the below steps to know how. (1) Begin by navigating to the Settings app of your phone. (2) Next, go to Display and look for Ambient Display. Update (02/22/24): “Lift to wake” feature is also something similar to Ambient feature. While this feature is on, users do not have to turn on their screen manually after lifting it. The display turns on automatically as soon as the user lifts the phone, and hence the phone turns on by itself. To turn off this feature, make sure to follow the below steps. (1) Begin by navigating to the Settings app of your phone. (2) Next, go to Moves. (3) Make sure to turn off the toggle for the “Lift to check phone” option. The Double tap to wake feature...

i think it will use it as asynchronous mode at 800MHZ and the 800MHZ memory will be a huge upgrade for your system

If the battery charge LED indicator light turns on and off while AC power is connected and the battery is still charging, the battery is simply in a low-charge state. The Windows battery property shows that the battery is Online - discharging. This occurs because of the battery's charging cycle.

Verify that the "Silent Mode" is off: If your phone has a "Ring switch", move the switch forwards so that the orange bar is hidden. You can also use "Control Center" to check if the "Silent Mode" is turned on.

Here's how to easily reset your BIOS or UEFI password on Asus laptops (actually it will remove your BIOS UEFI password, wipe it out) : This only works if you can boot into windows (or other OS) ! It will reset you BIOS or UEFI password if you have forgotten it. - Boot into windows and change the date to 2002/01/02, - Reboot while while hitting F2 to get into the BIOS / UEFI, when the enter password window appears hit "Alt + r", a "Enter rescue password" window will appear, with 2002/01/02 date showing (if not the code won't work), enter the following rescue password : ALAA4ABA - Done ! You're in the BIOS / UEFI - Change back the date and other settings to their correct values in the BIOS / UEFI, save settings, and you're good. On the internet, you can even find whole lists of date/password couples to enter in the "Enter recovery password" window, i used the one above which worked perfectly.. I have a lot of Asus products, multiple computers over the years, and have been, and am, very satisfied with all of...

open the controller then clean the sticks with Isopropyl alcohol (IPA) so there won't be any damage to the electronics NB: be very careful and gentle then after put it back and test it again

(1) Run the Hardware troubleshooter (2) Update the laptop camera driver (3) Reinstall the laptop camera (4) Roll back driver (5) Check your antivirus software (6) Check the camera privacy settings

download 3u tools then download the restore firmware and use it...that should solve the problem

first make sure airplane mode is off then if it is try uninstalling the old drivers n download new and updated ones. sometimes your computer might just want you to update your software

if it fell into water or on the ground real hard. you might need a replacement but if non of that happened it might happen that your storage is full or you running lot of applications at the same time.