Este perfil no está completo aún.
Respuestas
1. Connect to iTunes 2. Hold down power button and home button at the same time until screen turns off, then count 1 to 5 3. Release power button and wait for the computer screen to pop up the message asking to restore 4. Release home button, then restore the phone
Leer másEntering DFU Mode 1. Plug your device into your computer. 2. Turn off the device. 3. Hold the Power button for 3 seconds. 4. Hold the Home button without releasing the Power button for 10 seconds. 5. Release the Power Button but keep holding the Home button. 6. Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode Make sure the device screen is blank and no logos are present. Restore the phone
Leer mási think it is the bleeding LCD. If it works fine, than just use it till it works if it start showing some problem, you may have to change the LCD.
Leer másTry different USB Cable Also, try the different computer. Hope, It Works.
Leer másMight be Hard reset will work. Taking The Phone into DFU mode.
Leer másEntering DFU Mode 1. Plug your device into your computer. 2. Turn off the device. 3. Hold the Power button for 3 seconds. 4. Hold the Home button without releasing the Power button for 10 seconds. 5. Release the Power Button but keep holding the Home button. 6. Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode Make sure the device screen is blank and no logos are present. Restore the phone
Leer másDFU Mode 1. Plug your device into your computer. 2. Turn off the device. 3. Hold the Power button for 3 seconds. 4. Hold the Home button without releasing the Power button for 10 seconds. 5. Release the Power Button but keep holding the Home button. 6. Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode Make sure the device screen is blank and no logos are present. Restore the phone :)
Leer másJust re-connect the home button and do the hard reset it will work :)
Leer másI agree with Marty Morrow. See that if the battery is puffy and bloated. if it is so, its the battery problem. i think it can be fixed by changing the battery.
Leer másUnfortunately NO, The flex cable are different, so you cannot do that. Sorry :)
Leer másPág. 1 de 2
Patrick
@jaynepal
834
Reputación
11
Soluciones
0
Guías
Es miembro desde 04/04/16