Este perfil no está completo aún.
Respuestas
take a look at this see page 41 https://download.lenovo.com/consumer/mob...
Leer másMost keyboards no longer use springs but instead use rubber. the only exception to this is mechanical keyboards and those can be identified by clicking when you press a key. the best bet would ether use a donor keyboard or replace the whole keyboard
Leer máswhat i would try first would be to defragment the files on the drive using a defragmenting program window has one built in to see if that would fix the issue if it does not then the issue is probably the drive itself. hear is a good video of what it does and how it works https://www.youtube.com/watch?v=XSvOfu2P...
Leer másFrom what you are describing it is normally for batteries to slowly loose its charge capacity over time. on the other hand it should not loose it that quickly. it is possibly you have a bad battery but i would try this to see what happens over the coarse of a few days try and let the battery die then charge it fully and repeat if that does not do anything then i would look and see if the replacement battery came with a warranty and go that route.
Leer másfor things like this specs do not matter what matters is the layout of the board. short answer is probably going to be a no. long answer you would need to look at the boards physical size from every direction including the height of the components, the look at how the components are arranged. you will then have to make sure that your carrier will support the new guts of the device as well.
Leer másafter reading you question several times i would have to say maybe. The best thing for this would be to have someone that know electronics look at to see what is going on.
Leer másMost computers will give you a key to press to go into the bios as well as a key to go into the boot device menu. this option give you the various device that the computer will boot from. according to http://tim.id.au/laptops/acer/travelmate... on page 35 this key is f12.
Leer másI would see if you can see anything on the screen when you get it into the light just right you will need to use a bright source of light if you can then it is a back light issue. if you can not then the problem is ether the screen or the the device itself.
Leer másWith out looking at it may and may not be fixable. On the other hand things like this are not really fixable. if it is fixable you would need someone that know what there are doing with a soldering iron. sorry i know that is not the answer you are looking for for.
Leer másIf you can see the picture on the dark side then it probable is not a problem with the screen. it sounds more like a back light issue to me. That is where I would look for the problem.
Leer másPág. 1 de 2
Josh
@josh60726
169
Reputación
15
Soluciones
0
Guías
Es miembro desde 08/27/15