@sunildeshmukh first check your settings to rule out that this is caused by the timer
Energy saving settings
-
# Press (Home).
-
-
# Select [Setup], and then press OK .
-
-
# Select [Preference], and then press OK.
-
+
# Press (Home).
+
# Select (Setup), and then press OK .
+
# Select (Preference), and then press OK.
# Press the Navigation buttons and OK to select and change:
-
-
* [Screen saver] : Switch the home theater to screen saver mode after 10 minutes of inactivity.
-
-
* [Auto standby]: Switch the home theater to standby after 30 minutes of inactivity. This timer works only when a disc or USB play is paused or stopped.
-
-
* [Sleep timer] : Set the duration of the sleep timer so that the home theater is switched to standby after the specified period
+
* (Screen saver) : Switch the home theater to screen saver mode after 10 minutes of inactivity.
+
* (Auto standby): Switch the home theater to standby after 30 minutes of inactivity. This timer works only when a disc or USB play is paused or stopped.
+
* (Sleep timer) : Set the duration of the sleep timer so that the home theater is switched to standby after the specified period
@sunildeshmukh first check your settings to rule out that this is caused by the timer
Energy saving settings
# Press (Home).
# Select [Setup], and then press OK .
# Select [Preference], and then press OK.
# Press the Navigation buttons and OK to select and change:
* [Screen saver] : Switch the home theater to screen saver mode after 10 minutes of inactivity.
* [Auto standby]: Switch the home theater to standby after 30 minutes of inactivity. This timer works only when a disc or USB play is paused or stopped.
* [Sleep timer] : Set the duration of the sleep timer so that the home theater is switched to standby after the specified period