Versión actual por: Pavel S.
Título:
POST fails, checkstop LED blinks twice repeatedly
Texto:
I’m playing with a Quad Core PowerMac G5 (A1117). So far everything was fine, I’ve reworked all the thermals and the machine worked well for more than a week under high load, compiling non-stop. Today I’ve turned it off and after several hours tried to turn on. But it doesn’t POST anymore - checkstop led (led #7) blinks twice after power on, then waits, then blinks twice again. I’ve tried to pull out the RAM and graphics card - no change. Tried to power on without CPU module at all - well, as expected it turns on CPU leds. Video: https://youtu.be/fHsGQON55CM Would be grateful for any hints what may it mean.
Dispositivo:
Power Mac G5 Late 2005
Estatus:
open
Respuesta Aceptada:
| + | 609129 |
|---|
Editado por: Pavel S.
Título:
POST fails, checkstop LED blinks twice repeatedly
Texto:
| I’m playing with a Quad Core PowerMac G5 (A1117). So far everything was fine, I’ve reworked all the thermals and the machine worked well for more than a week under high load, compiling non-stop. | |
| - | Today I’ve turned it off and after several hours tried to turn on. But it doesn’t POST anymore - checkstop led (led #7) blinks twice after power on, then waits, then blinks twice again. Video: https://youtu.be/fHsGQON55CM |
| + | Today I’ve turned it off and after several hours tried to turn on. But it doesn’t POST anymore - checkstop led (led #7) blinks twice after power on, then waits, then blinks twice again. I’ve tried to pull out the RAM and graphics card - no change. Tried to power on without CPU module at all - well, as expected it turns on CPU leds. |
| + | |
| + | Video: https://youtu.be/fHsGQON55CM |
| Would be grateful for any hints what may it mean. |
Dispositivo:
Power Mac G5 Late 2005
Estatus:
open
Aporte original por: Pavel S.
Título:
POST fails, checkstop LED blinks twice repeatedly
Texto:
I’m playing with a Quad Core PowerMac G5 (A1117). So far everything was fine, I’ve reworked all the thermals and the machine worked well for more than a week under high load, compiling non-stop. Today I’ve turned it off and after several hours tried to turn on. But it doesn’t POST anymore - checkstop led (led #7) blinks twice after power on, then waits, then blinks twice again. Video: https://youtu.be/fHsGQON55CM Would be grateful for any hints what may it mean.
Dispositivo:
Power Mac G5 Late 2005
Estatus:
open