Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Use the flat end of a spudger to disconnect the flex cable of the left rear camera.
-
The second rear camera will come out with the motherboard since it is connected on the other side.
-
You can leave the front facing camera in its place as long as you're careful while removing the motherboard assembly. However if you feel uncertain, carefully remove it with a pair of tweezers.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.