Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.
Traduciendo paso 3
Paso 3
-
The antenna loop board needs to be pried up (it is glued down). Gently use a plastic opening tool or spudger, to dislodge the antenna loop board. The board is connected to the antenna electronics by a small ribbon cable. This two-board assembly is very frail.
-
The two small antenna circuit boards can now be lifted up together, and their orange cable can be peeled from the display.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.