Saltar al contenido principal

Reemplazo de lentes de Fujifilm X100T

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 26
Fujifilm X100T Lens Replacement: paso 0, imagen 1 de 1
  • Locate the adhesive connecting the black and red wires above the green board.

  • Remove the adhesive by gently pulling it off with your hand.

  • Remove the copper tape that grounds the sensor heatsink to the sensor PCB.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.