Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
| [* red] Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector. | |
| - | [* icon_caution] The 5-Point Pentalobe screwdriver should only be used a limited number of times because it has the potential to strip the screws. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.