Saltar al contenido principal

Remplacement des boutons de réglages du Nikon Coolpix L820

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Francés

Traduciendo paso 1

Paso 1
Nikon Coolpix L820 Settings Buttons Replacement: paso 0, imagen 1 de 3 Nikon Coolpix L820 Settings Buttons Replacement: paso 0, imagen 2 de 3 Nikon Coolpix L820 Settings Buttons Replacement: paso 0, imagen 3 de 3
  • Remove the battery before beginning.

  • Use a Phillips #0 screwdriver to remove the screws on the front casing. There are 10 screws around the casing. 3 are located on the left side of the camera, 6 are located on the bottom near the product label, and 1 is located on the right side of the camera.

Retirez la batterie avant de commencer.

Utilisez un tournevis cruciforme n ° 0 pour retirer les vis du boîtier avant. Il y a dix vis, trois sur le côté gauche, deux en bas et une sur le côté droit de la caméra.

[* icon_caution] Remove the battery before beginning.
-[* red] Use a Phillips #0 screwdriver to remove the screws on the front casing. There are ten screws, three on the left side, two on the bottom, and one on the right side of the camera.
+[* red] Use a Phillips #0 screwdriver to remove the screws on the front casing. There are 10 screws around the casing. 3 are located on the left side of the camera, 6 are located on the bottom near the product label, and 1 is located on the right side of the camera.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.