Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Chino
Paso 2
Slide the spudger under the battery side of the digitizer board to begin separating it from the rear case. Lift the digitizer board up to free the last of the adhesive. Lift the digitizer board up to free the last of the adhesive.
  • Slide the spudger under the battery side of the digitizer board to begin separating it from the rear case.

  • Lift the digitizer board up to free the last of the adhesive.

将撬棒滑入数字面板的电池侧,开始与后壳分离。

将数字面板抬起以去除最后的粘合剂。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.