Saltar al contenido principal

iPad Mini 2 Wi-Fi LCD 交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Japonés
Paso 4
iPad Mini 2 Wi-Fi LCD Replacement: paso 0, imagen 1 de 2 iPad Mini 2 Wi-Fi LCD Replacement: paso 0, imagen 2 de 2
  • Use flat end of a spudger to lift the LCD connector up off its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

スパッジャーの平面側先端を使用してロジックボード上のソケットからLCDコネクタを待ち上げます。

コネクタの横にある大きなICにぶつからないでください。破損する可能性があります。図のようにコネクタの側面から丁寧に持ち上げます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.