Saltar al contenido principal

iPad Mini 3 Wi-Fi 液晶显示板更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 48 guías que incluyen este paso.

Inglés
Chino
Paso 8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: paso 0, imagen 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: paso 0, imagen 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: paso 0, imagen 3 de 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

将第一个插入iPad的撬片向上滑动到iPad的左上角

撬片可能会出现图片上的情况,请不要慌张。 只需将撬片拉出一点点来继续进行维修工作。 但要避免这种情况,因为粘合剂可能会粘附在LCD显示屏上变得难以清理。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.