Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 36 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Remove the three Phillips screws in the battery compartment near the latch. Apple was nice enough to tilt these screws at a slight angle to make them easier to remove. On the A1261 these screws have 4 mm diameter heads rather than the 3 mm heads on the body screws.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.