Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.
Traduciendo paso 2
Paso 2
Front panel preparation
-
Peel the large clear plastic liner off of the inside of the glass.
-
Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly.
-
Don't remove any copper coverings from the outlined region, such as yellow kapton tape or black electrical tape.
-
Ensure the glass panel is free of fingerprints and grime before installing it on your device.
| - | [* icon_note] If you're installing a new front panel assembly, it may need the following preparation: |
|---|---|
| - | [* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly. |
| - | [* orange] Remove the small piece of adhesive backing from the digitizer cable. |
| - | [* black] Make sure all copper is covered on the new replacement screen as once fitted without this the screen will move randomly. |
| + | [title] Front panel preparation |
| + | [* icon_reminder] This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue. |
| + | [* icon_note] If you're installing a new front panel assembly, it ***may*** need the following preparation: |
| + | [* red] Peel the large clear plastic liner off of the inside of the glass. |
| + | [* orange] Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly. |
| + | [* icon_caution] Once removed, the adhesive strips will be exposed. Don't remove these backings until you're ready to install the front panel assembly. |
| + | [* yellow] ***Don't remove any copper coverings from the outlined region***, such as yellow kapton tape or black electrical tape. |
| + | [* black] Ensure the glass panel is free of fingerprints and grime before installing it on your device. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.