Saltar al contenido principal

iBook G4 14" 933 MHz-1.33 GHz Heat Sink Replacement

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 4
iBook G4 14" 933 MHz-1.33 GHz Heat Sink Replacement: paso 0, imagen 1 de 1
  • It may be necessary to soften the thermal paste between the logic board and heat sink. You can soften the thermal compound using a hairdryer. Move the hairdryer back and forth over the ribbed metal section of the heat sink for one minute. At this point, the heat sink should come free easily.

  • Use a spudger to pry the heat sink up on the left side, near the hard drive.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.