Saltar al contenido principal

Reemplazo de la placa madre y el disipador de calor

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Español
Paso 7
Xbox Series X Motherboard Removal (Motherboard): paso 0, imagen 1 de 3 Xbox Series X Motherboard Removal (Motherboard): paso 0, imagen 2 de 3 Xbox Series X Motherboard Removal (Motherboard): paso 0, imagen 3 de 3
  • Depending on the condition of the thermal paste and putty, the board may be bonded to the heatsink assembly. If you can't easily remove the board, use a spudger to gently lift the edges of the board to separate it.

  • Lift the motherboard straight up and off of the heatsink to remove it.

  • During reassembly, carefully place the board onto the heatsink with the APU facing down. Remember, there's exposed thermal paste on the bottom of the board, so use the alignment pegs to orient it correctly. If you have to reposition the board, it may smear the thermal paste.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.