Saltar al contenido principal

Xbox Series X 电源更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Chino
Paso 11
Shield Plate and Rubber Strap Removal, Remove the board shield: paso 0, imagen 1 de 1
Remove the board shield
  • Use a T8 Torx driver to remove the nine screws securing the board shield:

  • Six 8.8 mm black screws

  • Two 35 mm silver screws

  • One 13.1 mm silver screw

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.