Saltar al contenido principal

Abschirmplatte und Elastikband entfernen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Alemán
Paso 7
Shield Plate and Rubber Strap Removal, Remove the corner cover: paso 0, imagen 1 de 1
Remove the corner cover
  • Use a T8 Torx driver to remove the 8.8 mm screw securing the power supply corner cover.

Entferne die 8,8 mm Torx T8 Schraube, die die Abdeckung der Netzteilecke fixiert.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.