Saltar al contenido principal

バッテリーブラケットの取り外し

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
Battery Bracket Removal, Remove the R back button ribbon cable: paso 0, imagen 1 de 2 Battery Bracket Removal, Remove the R back button ribbon cable: paso 0, imagen 2 de 2
Remove the R back button ribbon cable
  • Make sure you removed both the L2 and the R2 adaptive trigger assemblies before continuing.

  • Use a pair of tweezers to disconnect the RB back button ribbon cable connector from the motherboard by griping the blue tab on the ribbon cable and pulling away from the connector.

  • The RB back button has an "R" engraved on the bracket and it's to your left.

作業を続ける前に、L2およびR2のアダプティブトリガーアセンブリの両方が取り外されていることを確認してください。

ピンセットを使用して、リボンケーブルの青いタブをつまみ、コネクタから引き離すことで、RBバックボタンのリボンケーブルコネクタをマザーボードから取り外します。

RBバックボタンにはブラケットに「R」の刻印があり、それは向かって左側にあります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.