Saltar al contenido principal

DualSense Edge リアトリムの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 15 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 3

Paso 3
DualSense Edge Rear Trim Replacement, Remove the rear trim: paso 0, imagen 1 de 3 DualSense Edge Rear Trim Replacement, Remove the rear trim: paso 0, imagen 2 de 3 DualSense Edge Rear Trim Replacement, Remove the rear trim: paso 0, imagen 3 de 3
Remove the rear trim
  • Slide the opening along the edge of the trim on the other grip.

  • Once all clips are released, remove the trim.

  • If at any point the trim feels stuck, stop and look for any clips that may have re-engaged and release them with the opening pick to avoid damaging them.

もう一方のグリップのトリムのエッジに沿って開口部をスライドさせます。

すべてのクリップが外れたら、トリムを取り外します。

トリムが引っかかっているように感じたら、作業を中断し、再係合したクリップがないか確認し、破損したクリップを避けるためにオープニングピックでそれらを外します。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.