Saltar al contenido principal

Kobo Libra Colour 전원 버튼 보드 교체

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Coreano
Paso 12
Kobo Libra Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The power button board is held in place with adhesive and aligned by two pegs in the frame.

  • Apply a heated iOpener to the power button board for 90 seconds to soften the adhesive underneath.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

전원 버튼 보드는 접착제로 제자리에 고정되어 있으며 프레임의 페그 두 개로 정렬되어 있습니다.

전원 버튼 보드에 90초 동안 가열된 iOpener를 대어 아래 접착제를 부드럽게 하세요.

대안으로 헤어 드라이어나 히트 건을 사용하여 30초 동안 열을 가할 수도 있습니다.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.