Saltar al contenido principal

Kobo Libra Colour 電源ボタンボードの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Japonés
Paso 10
Kobo Libra Colour Power Button Board Replacement, Soften the interconnect cable adhesive: paso 0, imagen 1 de 3 Kobo Libra Colour Power Button Board Replacement, Soften the interconnect cable adhesive: paso 0, imagen 2 de 3 Kobo Libra Colour Power Button Board Replacement, Soften the interconnect cable adhesive: paso 0, imagen 3 de 3
Soften the interconnect cable adhesive
  • Apply a heated iOpener to the top edge of the eReader for 90 seconds to soften the adhesive under the interconnect cable.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

加熱したiOpenerをeリーダーの上端に90秒間当て、相互接続ケーブルの下の接着剤を柔らかくします。

または、ヘアドライヤーまたはヒートガンを30秒間使用することもできます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.