Saltar al contenido principal

Kobo Libra Colour Akku tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Alemán
Paso 3
Kobo Libra Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 1 de 3 Kobo Libra Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 2 de 3 Kobo Libra Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 3 de 3
Remove the stretch release adhesive
  • Grip a black pull tab and pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery.

  • You can also wrap an adhesive strip around a spudger and "roll" it for a more consistent pull.

  • If the adhesive strip breaks off, try to retrieve it using your fingers and continue pulling—but don’t pry under the battery.

  • If you can't retrieve a strip, don't worry! Remove as much adhesive as possible and skip down two steps for an alternate method.

Fasse eine schwarze Zuglasche und ziehe den Streifen langsam und gleichmäßig in einem flachen Winkel heraus. Gib ihm genügend Zeit, sich zu dehnen und sich unter dem Akku zu lösen.

Du kannst den Klebestreifen auch um einen Spudger wickeln und ihn aufrollen, um einen gleichmäßigeren Zug zu erzielen.

Wenn der Klebestreifen abreißt, versuche, ihn mit den Fingern herauszuholen und ziehe weiter - aber heble auf keinen Fall unter dem Akku.

Wenn du einen Streifen nicht mehr herausholen kannst, keine Sorge! Entferne so viel vom Klebestreifen wie möglich und gehe zwei Schritte nach unten, dort findest du eine alternative Methode.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.