Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 ロジックボードの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Japonés

Traduciendo paso 32

Paso 32
iPad Pro 12.9" 4th Gen Logic Board Replacement, Remove the logic board: paso 0, imagen 1 de 2 iPad Pro 12.9" 4th Gen Logic Board Replacement, Remove the logic board: paso 0, imagen 2 de 2
Remove the logic board
  • Grab and remove the logic board from the frame.

  • Be careful not to reinstall the logic board on top of any cables or connectors.

  • During reassembly, apply double-sided tape such as Tesa tape to secure the logic board if the existing adhesive isn't sufficient.

フレームからロジックボードを摘んで外します。

ケーブルやコネクターの上にロジックボードを再装着しないように注意してください。

再組み立ての際、既存の接着剤で十分でない場合は、Tesaテープなどの両面テープでロジックボードを固定してください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.