Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 ロジックボードの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Japonés
Paso 15
iPad Pro 12.9" 4th Gen Logic Board Replacement, Peel the upper antenna cable: paso 0, imagen 1 de 3 iPad Pro 12.9" 4th Gen Logic Board Replacement, Peel the upper antenna cable: paso 0, imagen 2 de 3 iPad Pro 12.9" 4th Gen Logic Board Replacement, Peel the upper antenna cable: paso 0, imagen 3 de 3
Peel the upper antenna cable
  • Use blunt nose tweezers or your fingernail to peel the tape securing the upper antenna cable to the right arm of the logic board.

  • Don't try to fully remove the cable—one more piece of tape secures it to the logic board.

  • If the tape feels stuck, pull the body of the cable with your fingers as you peel the tape.

鈍いピンセットか指の爪を使って、上部アンテナケーブルをロジックボードの右側アームに固定しているテープをはがします。

ケーブルを完全に剥がさないでください、もう一枚のテープでロジックボードに固定した状態にします。

テープが引っかかるようであれば、テープ を剥がしながら、ケーブル本体を指で引っ張ります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.