Saltar al contenido principal

iPad Pro 12.9" 4th Gen 전면 카메라 어셈블리 교체

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Coreano

Traduciendo paso 1

Paso 1
iPad Pro 12.9" 4th Gen Front Camera Assembly Replacement, Unfasten the upper cable shield: paso 0, imagen 1 de 1
Unfasten the upper cable shield
  • Use your Phillips screwdriver to remove the four screws securing the upper cable shield:

  • Three 1.1 mm screws

  • One 2.0 mm screw

필립스 스크루드라이버를 사용하여 상단 케이블 실드를 고정는 나사 4개를 풀어주세요:

1.1mm 나사 3개

2.0mm 나사 1개

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.