Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 開口方法

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés
Paso 4
iPad Pro 12.9" 4th Gen Opening Procedure: paso 0, imagen 1 de 2 iPad Pro 12.9" 4th Gen Opening Procedure: paso 0, imagen 2 de 2
  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • If your screen isn't getting hot enough, you can use a hair dryer to heat along the right edge of the iPad.

  • For complete instructions on how to use a hair dryer, check out this guide.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.

  • Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next step.

青いハンドルをヒンジから離して前方に向かって押し、オープニングモードにします。

画面が十分に熱くなっていない場合は、ドライヤーを使ってiPadの右端に沿って熱を加えることができる。

ヘアドライヤーの使い方に関するインストラクションは、このガイドを参照してください。

接着剤がはがれて、底面が開くまでそのまま1分ほど同じ状態を保ちます。

リバースクランプで十分な隙間ができたところで、スクリーンのフレームの下にオープニングピックを挿入します。

リバースクランプで十分な隙間ができない場合は、その部分にさらに熱を加えて、ハンドルを時計回りに半回転させてください。

一度に半回転以上回さず、1分ほど待ってからさらに半回転、回します。時間をかけてリバースクランプを回していきます。

次の手順はスキップしてください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.