Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 開口方法

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés
Paso 6
iPad Pro 12.9" 4th Gen Opening Procedure, Right edge information: paso 0, imagen 1 de 3 iPad Pro 12.9" 4th Gen Opening Procedure, Right edge information: paso 0, imagen 2 de 3 iPad Pro 12.9" 4th Gen Opening Procedure, Right edge information: paso 0, imagen 3 de 3
Right edge information
  • Along the frame's right edge, there are two cutouts for the screen magnets where the adhesive is very thin. As you slice along this edge in the next step, don't insert your opening pick deeper than 2 mm in these locations:

  • One magnet begins 2 cm from the top edge and is 2.5 cm long.

  • The second magnet begins 3 cm from the bottom edge and is 2.5 cm long.

フレームの右端には、スクリーンマグネット用の切り込みが2箇所あり、接着剤が非常に薄くなっています。次の手順でこの縁に沿ってスライスするとき、これらの場所にオープニングピックを2mm以上深く差し込まないでください。

1つのマグネットは上端から2cmのところから始まり、2.5cmの長さです。

2つ目の磁石は、下端から3cmのところから始まり、2.5cmの長さです。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.