Saltar al contenido principal

iPad Pro 12.9" 4th Gen 여는 절차

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Coreano
Paso 5
iPad Pro 12.9" 4th Gen Opening Procedure, Insert an opening pick: paso 0, imagen 1 de 3 iPad Pro 12.9" 4th Gen Opening Procedure, Insert an opening pick: paso 0, imagen 2 de 3 iPad Pro 12.9" 4th Gen Opening Procedure, Insert an opening pick: paso 0, imagen 3 de 3
Insert an opening pick
  • If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Apply a suction handle to the screen as close to the center of the right edge as possible.

  • Pull up on the suction handle with a strong, steady force to create a small gap between the frame and screen.

  • The large screen is very fragile. Only create a gap big enough to insert an opening pick.

  • Insert an opening pick into the gap.

  • Don't insert the pick more than 5 mm to avoid damaging the screen.

스크린에 금이 심하게 간 경우 투명 포장 테이프를 스크린에 붙이면 흡입 컵이 잘 붙을 수 있습니다. 또는 흡입 컵 대신 매우 강한 테이프를 사용할 수도 있습니다. 다른 모든 방법이 실패하면 흡입 컵을 깨진 스크린에 초강력 접착제로 붙일 수 있습니다.

스크린에 흡입 손잡이를 최대한 오른쪽 가장자리 중앙에 가깝게 붙이세요.

강하고 일정한 힘으로 흡입 손잡이를 위로 당겨 프레임과 스크린 사이에 작은 간격을 만드세요.

큰 스크린은 매우 깨지기 쉽습니다. 여는 픽을 끼울 수 있을 만큼만 간격을 만드세요.

틈새에 여는 픽을 끼우세요.

스크린이 손상됨을 방지하기 위해 픽을 5mm 이상 끼우지 마세요.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.