Saltar al contenido principal

Reemplazo de la puerta delantera del Cricut Maker

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Español
Paso 9
Cricut Maker Front Door Replacement: paso 0, imagen 1 de 3 Cricut Maker Front Door Replacement: paso 0, imagen 2 de 3 Cricut Maker Front Door Replacement: paso 0, imagen 3 de 3
  • Remove a total of seven 10 mm screws from the underside of the door.

  • One side of the base has two 10mm screws.

  • The other side of the base has five 10 mm screws.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.