Cricut Maker Top Door/ Lid Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés

Coreano

Traduciendo paso 1

Paso 1

To remove the cover from the connecting joint, use an iFixit opening tool, and pry around the perimeter of the cover to release it.
Applying too much pressure to this can break it as it is very fragile.
There is some adhesive holding the cover, so it may take some patience and finesse to pry the cover off.
Remove the cover from the connecting joint and set it aside.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.