Saltar al contenido principal

Xbox Series X Lüfter ersetzen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 31 guías que incluyen este paso.

Inglés
Alemán

Traduciendo paso 3

Paso 3
Xbox Series X Fan Replacement, Remove the fan: paso 0, imagen 1 de 2 Xbox Series X Fan Replacement, Remove the fan: paso 0, imagen 2 de 2
Remove the fan
  • Slide the fan out of its slot to remove it.

  • During reinstallation, note that the fan can only be installed one way—make sure Master Chief is facing you.

  • If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

Schiebe den Lüfter aus der Halterung, um ihn zu entfernen.

Der Lüfter passt nur auf eine Art in die Halterung. Achte beim Zusammenbau darauf, dass der Master Chief zu dir schaut.

Der Einbaurahmen aus Kunststoff wird bei einem neuen Austauschlüfter möglicherweise nicht mitgeliefert. Diese Halterung ist mit vier Torx T10 Schrauben am Lüfter festgeschraubt. Dies wird in der Anleitung nicht gezeigt.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.