Saltar al contenido principal

Xbox Series S Bluetooth Board ersetzen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Alemán

Traduciendo paso 2

Paso 2
Xbox Series S Bluetooth Board Replacement: paso 0, imagen 1 de 3 Xbox Series S Bluetooth Board Replacement: paso 0, imagen 2 de 3 Xbox Series S Bluetooth Board Replacement: paso 0, imagen 3 de 3
  • Use a spudger to pry and loosen the Bluetooth board.

  • Do not pry from the bottom or sides of the Bluetooth board as it may bend the connector.

  • Pull the Bluetooth board straight out to disconnect it from the chassis.

Heble und löse das Bluetooth Board mit einem Spudger.

Heble nicht von unten oder von der Seite. Das könnte den Anschluss verbiegen.

Ziehe das Bluetooth Board gerade weg, um es vom Chassis zu entfernen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.