Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Inglés
Español

Traduciendo paso 1

Paso 1
Use a tweezer to slightly bent the logic board contacts on the USB connector. The purpose is to ensure a good contact when the USB connector will be applied against the logic board. In the first picture, you can see the contacts in the original position. In the third picture, you can see the contacts in the bent position.
  • Use a tweezer to slightly bent the logic board contacts on the USB connector. The purpose is to ensure a good contact when the USB connector will be applied against the logic board.

  • In the first picture, you can see the contacts in the original position.

  • In the third picture, you can see the contacts in the bent position.

  • Be careful, the contactors are fragile. Just slightly bent them.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.