Traduciendo paso 7
Paso 7
-
Using a #0 Phillips screwdriver, remove the four 3.25 mm screws
- | [* red] Using a #0 Phillips screwdriver, remove the four 3.25 mm screws (note that there are two more screws in the same positions on the opposite side of the display). |
---|---|
+ | [* red] Using a #0 Phillips screwdriver, remove the four 3.25 mm screws |
+ | [* icon_note] The other two screws are in the same position on the opposite side of the display. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.