Saltar al contenido principal

Teardown des MacBook Pro (16 Zoll, 2019)

Inglés
Alemán
Paso 7
MacBook Pro 16" 2019 Teardown: paso 0, imagen 1 de 3 MacBook Pro 16" 2019 Teardown: paso 0, imagen 2 de 3 MacBook Pro 16" 2019 Teardown: paso 0, imagen 3 de 3
  • Torx screws, schmorx screws—our Marlin driver set does it all. (Although come to think of it, we've yet to find a use for the schmorx bits.)

  • Even with this computer open, we're faced with more mystery—a masked MacBook! Is it you, Bruce?

  • Apple touts major advancements in this MacBook Pro's thermal design, and says this heat sink is 35 percent bigger. (We'd have guessed 34, but let's take their word for it.)

  • We also found some upgraded hardware covering what we presume to be fast new GDDR6 chips—a copper shield and a couple aluminum thermal pads.

Torx Schrauben, Schmorx Schrauben, unser Marlin Schraubendreher-Set wird mit allem fertig. (Obwohl, wenn wir so darüber nachdenken, müssen wir noch eine Verwendung für die Schmorx-Bits finden.)

Selbst wenn der Computer geöffnet ist, stehen wir vor einem weiteren Rätsel, einem maskierten MacBook! Bist du das, Bruce?

Apple preist beim Wärmedesign dieses MacBook Pro wichtige Fortschritte an, und sagt, dass dieser Kühlkörper 35 Prozent größer ist. (Wir hätten eher 34 geraten, aber glauben wir ihnen einfach mal.)

Wir haben auch etwas verbesserte Hardware gefunden, die das, was wir für die neuen schnellen GDDR6 Chips halten, bedecken: eine Kupferplatte und ein paar Wärmepads aus Aluminium.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.