Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés
Chino
Paso 4
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

拉住吸盘,在玻璃和机壳之间的缝隙处放置一个撬片。

切勿将撬片插入深度超过黑色边框,这样深入过度可能会使LCD屏幕受损。

然后拉动吸盘塑料部分来将吸盘从显示模组上取下。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.