Saltar al contenido principal

iPad Mini CDMAのフロントパネルの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés
Japonés
Paso 3
iPad Mini CDMA Front Panel Replacement: paso 0, imagen 1 de 3 iPad Mini CDMA Front Panel Replacement: paso 0, imagen 2 de 3 iPad Mini CDMA Front Panel Replacement: paso 0, imagen 3 de 3
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you may risk cracking the glass.

温めた側の真ん中に吸盤ップを取り付けます。

カップがしっかりと密封された状態でスクリーン上で完全に平らな状態で装着されているか確認してください。

iPadを片手で持ちながら、吸盤カップを背面ケースから正面パネルガラスを引き離すように引っ張り上げます。

開口ピックが差し込める隙間ができるまで吸盤カップを引き上げてください。それ以上引っ張ると、ガラスにひびが入ってしまうリスクがあります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.