Saltar al contenido principal

Microsoft Surface Goの分解

Inglés
Japonés
Paso 7
Microsoft Surface Go Teardown: paso 0, imagen 1 de 3 Microsoft Surface Go Teardown: paso 0, imagen 2 de 3 Microsoft Surface Go Teardown: paso 0, imagen 3 de 3
  • Turning our attention to the Wi-Fi antennas, we fully expect to find them mangled after that hack-and-slash display separation.

  • Having the display cover glass glued right over the top of the Wi-Fi antennas has wreaked havoc on many a Surface Pro repair attempt. Most times, the antennas don't survive display removal.

  • This time, we have to keep looking... and looking.

  • These antennas are actually tough to spot, and seem miraculously unscathed. That's one of our poor 5th-gen Surface Pro antennas up top, for comparison.

  • They've definitely been redesigned—perhaps with slightly less of a nail-biting repair experience in mind?

次にWi-Fiアンテナに注目してみましょう。ディスプレイを手当たり次第分離させて取り出した後ではWi-Fiアンテナは破壊されているはずです。

ディスプレイカバーのガラスはWi-Fiアンテナ上に直接、接着剤で留められているため、Surface Proの修理作業は暗礁に乗り上げます。ディスプレイを取り外す作業ではアンテナを上手く取り出せません。

ここでは、Wi-Fiアンテナを細かく探し続けながら…さらに探し続けます。

実際にWi-Fiアンテナは非常に見つけにくく、奇跡的に無傷のようです。これが前回分解した5th-gen Surface Proのアンテナです。比較してみてください。(3番目画像)

アンテナは間違いなく再設計されています。修理作業がもたらすストレスを若干軽減できるように考慮されたのでしょうか?

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.