Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.
Traduciendo paso 5
Paso 5
Remove Upper Electronics
-
Gently lift up on the top in order to separate it from the half that it is attached to.
-
Pull the plastic piece out from its retaining slot.
-
At this point, the PCB may make a slight popping sound. It didn't break! It simply popped out of it's retaining slot as well as you removed the plastic piece.
-
Remove the single screw that's hidden underneath the top/power button unit.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.