Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 4
Paso 4
-
Take the plastic opening tool and gently pry the circuit board out of the plastic tabs around the perimeter located as shown.
-
You must also pry the circuit board away from the battery case (picture 2).
-
Now gently lift up the circuit board from the right side and set it on the cloth.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.