Saltar al contenido principal

Quitar el cristal trasero del iPhone 16

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
iPhone 16 Back Glass Removal, Secure the screen: paso 0, imagen 1 de 3 iPhone 16 Back Glass Removal, Secure the screen: paso 0, imagen 2 de 3 iPhone 16 Back Glass Removal, Secure the screen: paso 0, imagen 3 de 3
Secure the screen
  • The next four steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down four steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • The Anti-Clamp applies suction to both the screen and the back glass. To open only the back glass, you need to secure the screen with tape. You can also check out the full instructions on how to use this tape.

  • Cut two strips of tape, apply them along the long edges of the phone, and fold them over the screen to secure it.

  • Make sure the tape is only securing the screen and not the back glass.

Los siguientes cuatro pasos muestran el Anti-Clamp, una herramienta que diseñamos para hacer el procedimiento de apertura más sencillo. Si no estas usando el Anti-Clamp, salta cuatro pasos para un método alternativo.

Para instrucciones completas de como usar el Anti-Clamp, revisa esta guía.

El Anti-Clamp aplica succión a la pantalla y al cristal trasero. Para abrir solo el cristal trasero, necesitas asegurar la pantalla con cinta. También puedes revisar las instrucciones completas en como usar esta cinta.

Corta dos pedazos de cinta, colócalos a lo largo de los bordes del teléfono, y dóblalos sobre la pantalla para asegurarla.

Asegúrate que la cinta solo esta asegurando la pantalla y no el cristal trasero.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.