Saltar al contenido principal

Sonicare Toothbrush HX6930 Teardown

Inglés
Español
Paso 2
Sonicare Toothbrush HX6930 Teardown: paso 0, imagen 1 de 3 Sonicare Toothbrush HX6930 Teardown: paso 0, imagen 2 de 3 Sonicare Toothbrush HX6930 Teardown: paso 0, imagen 3 de 3
  • Remove rubber ckt board cover & pull off the white cap at far left. Then unsolder wires at 6 points shown. While applying heat, extract solder with solder pump & solder wick. Gradually pry ckt board off the soldered points while applying heat. Then pull out the battery from the other side.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.