Saltar al contenido principal

Cambios al paso #9

Editado por Henry Braden Fisk

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Pull the two halves of the casing apart using your hands.
[* black] Pulling the two halves apart can be difficult the first time because they are so tightly connected, especially at the top. Use a moderate amount of force.
- [* black] There is a black rubber washer around the lens after you take the casing off. Make sure to replace it when putting the camera back together.
- [* black] Thin flaky plastic black blocker thing, "T" end between viewing lens and flash