Cambios al paso #2
Editado por Sydney Gray —
Edicion aprobada por Sydney Gray
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Use a plastic opening tool to remove the snap seals on the back panel. To do so: | |
| - | [* |
| - | [* black] Wedge the sharp edge of the tool into the seam and gently pry the panel up. |
| + | [* icon_note] There will be a snapping sound as the you gently pry, but that is just the seal becoming loosened |
| + | [* black] Wedge the sharp edge of the tool into the seam between the back panel and the rest of the laptop, then gently pry the panel up. |
| [* black] Continue breaking the seals around the entire laptop until the back panel is free. |