Cambios al paso #2
Editado por Niko Banks —
Edicion aprobada por Niko Banks
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Use the blue plastic opening tool to remove the snap seals on the back panel. To do so: | |
| - | [* black] Locate the seam between the back panel and the rest of the laptop. |
| - | [* black] Wedge the sharp edge of the tool into the seam and gently pry the panel up. |
| - | [* black] Continue breaking the seals around the entire laptop until the back panel is free. |
| + | [* black] Locate the seam between the back panel and the rest of the laptop. |
| + | [* black] Wedge the sharp edge of the tool into the seam and gently pry the panel up. |
| + | [* black] Continue breaking the seals around the entire laptop until the back panel is free. |