Saltar al contenido principal

Cambios a este Paso

Editado por Nick Tompkins

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Start by removing the 3mm screws from the side panel closest to the lens.
-[* black] Next, remove the two 3 mm screws from the bottom panel.
-[* black] Then, remove the two 3 mm screws from the side panel farthest from the lens, near the wrist-tye knot.
+[* black] Start by removing the 2 screws (2.90mm) from the side panel closest to the lens.
+[* black] Next, remove the 2 screws (2.90mm) from the bottom panel.
+[* black] Then, remove the 2 screws (2.90 mm) from the side panel farthest from the lens, near the wrist strap mount.